Site Logo
Search
  • Bandiera Italiana
  • » Oil and Gas products

Oil and Gas products

Our products can be used in several different applications for the Oil & Gas industry which is usually divided into three major sectors: upstream, midstream and downstream. The downstream sector commonly refers to the refining of petroleum crude oil and the processing and purifying of raw natural gas,  as well as the marketing and distribution of products derived from crude oil and natural gas. We are manufacturing components for the Oil&Gas plants and pipelines in all type of commonly used materials.
  • Spectacle Blind

    Spectacle Blind

    Figure 8 or Spectacle Blind may have a different type of joint face (RF Raised Face, FF Flat Face, RTJ Ring Joint), depending the type of flange. Here you can see Spectacle Blinds datasheets
  • Ring Spacer

    Ring Spacer

    Ring Spacer is made from a metal ring in different type of material, with a welded handle. The spacer function is to allow the passage of the fluid (or gas) in the line.
  • Paddle Blind

    Paddle Blind

    The Paddle Blind (Spade, Line Blind or pancake Blind) is made from a round piece of different type of material, with a handle furnished in a different form, according to the dimensional standard.
  • Drip Ring

    Drip Ring

    Drip Rings, or Flushing Rings or Bleed Rings are coupled between two seals. They are usually supplied with one hole or more holes. The Drip Ring can be welded to a Weldoflange or a branch connector.
  • Branch connectors (O'Lets)

    Branch connectors (O'Lets)

    O'Lets are used to connect a Branch with a Run pipe.
  • Gasket

    Gasket

    Gaskets are produced only in special materials.
  • Flanges (from solid bar)

    Flanges (from solid bar)

    We are not “hot forming” pieces by stamping them but we are tool machining a forged pieces to get to final dimensions. For this reason we keep on being competitive when pieces are out of standard or in exotic materials.
  • Special fittings

    Special fittings

    Special fittings are based on client’s drawings. Moreover we can be competitive when our client needs an assembled pieces made by few components to be welded or connected.
© All Right Reserved
powered by infonet srl piacenza
Privacy Policy
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie, consulta la cookie policy.
Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all’uso dei cookie.
Privacy Policy
OK