Oil and Gas products
Our products can be used in several different applications for the Oil & Gas industry which is usually divided into three major sectors: upstream, midstream and downstream. The downstream sector commonly refers to the refining of petroleum crude oil and the processing and purifying of raw natural gas, as well as the marketing and distribution of products derived from crude oil and natural gas.
La Meccanica Padana manufactures components for the Oil&Gas plants and pipelines in all type of commonly used materials.
Figure 8 or Spectacle Blind may have a different type of joint face (RF Raised Face, FF Flat Face, RTJ Ring Joint), depending the type of flange. Here you can see Spectacle Blinds datasheets
Ring Spacer is made from a metal ring in different type of material, with a welded handle. The spacer function is to allow the passage of the fluid (or gas) in the line.
The Paddle Blind (Spade, Line Blind) is made from a round piece of different type of material, with a handle furnished in a different form, according to the dimensional standard.
Drip Rings, or Flushing Rings or Bleed Rings are coupled between two seals. They are usually supplied with one hole or more holes. The Drip Ring can be welded to a Weldoflange or a branch connector.
O'Lets are used to connect a Branch with a Run pipe.Calculations of Branch connectors have to be done in accordance to ASME B31.3.
Gaskets are produced only in special materials.
We are not “hot forming” pieces by stamping them but we are tool machining a forged pieces to get to final dimensions. For this reason we keep on being competitive when pieces are out of standard or in exotic materials.
Special fittings are based on client’s drawings. Moreover we can be competitive when our client needs an assembled pieces made by few components to be welded or connected.